Description

The EKE Ushio 1000306 is a Halogen MR16 21V 150W Lamp with a GX5.3 base. Specifications for the 1000306 Ushio EKE Replacement Lamp GENERAL CHARACTERISTICS Shape MR16 Lamp Base GX5.3 (2-Pin, Round Pins) Filament CC-6 Bulb Finish Clear Rated Life 200 hours Operating Position BD/Hor PHOTOMETRIC CHARACTERISTICS Color Temperature 3250 K ELECTRICAL CHARACTERISTICS Watts 150 W Volts 21 V DIMENSIONS Maximum Overall Length - MOL 1.75in (44.50mm) Diameter 2.00in (50.80mm) PRODUCT INFORMATION Product Code 1000306 Family Name Ushio JCR Series MR-16 Tungsten Halogen Lamps Description EKE Ordering Code JCR21V-150W SKU Qty 1 Case Qty (Price Listed is Per Bulb) 10 Sales Unit Each UPC 048777119952 Ushio EKE 1000306 Replacement Bulb Applications & Features Applications Microscope Illuminator Bulb Fiber Optics 8mm Projection Features Ushio EKE (JCR21V-150W ) Halogen Bulb MR16 Lamp Dichroic Coated Reflector Focused Beam for Optical Applications Working Distance 44.5mm Only for Use in Approved Enclosed Halogen Fixtures Ushio EKE 1000306 Replacement Lamp Equipment 31-30-50-01 Bausch & Lomb Stereozoom 31-30-50-02 31-30-50-03 31-30-50-04 31-30-50-05 Bausch & Lomb 31-31-52 Microscope Burton Medical CoolSpot II Dentsply Caulk Triad TCU II TCU II Health Science Pro HSP Fiber Optic EKE Ushio Halogen Lamp DANGER! The Ushio EKE JCR21V-150W replacement lamp operates at extremely high temperatures that can cause serious physical injuries and property damage. Only use the Ushio EKE replacement lamp in Halogen-approved fixtures. Fixtures should fully contain any parts of the Halogen lamp upon the event of a lamp burst. Do not use the JCR21V-150W EKE Ushio replacement lamp in close proximity of paper, cloth or other combustible materials that can cause a fire hazard. Lamps are very fragile. Do not drop, crush, bend or shake them. Vibration or impact will cause filament breakage and short lamp life. Do not touch the Ushio EKE bulb surface or inside reflectors with your bare hands. Oils from skin can lead to breakage or shorten the life of the lamp. Use clean gloves or lint-free cloth for installation and removal. Clean any dirt, oil, or lint away from the bulb with alcohol and a lint-free cloth or tissue. Any foreign particles or materials on the EKE Ushio replacement bulb surface can cause hot spots on the bulb and result in lamp failure. Never touch the Ushio EKE lamp when it is on, or soon after it has been turned off, as it is hot and may cause serious burns. Do not look directly at the operating bulb for any period of time; this may cause serious eye injury. Always turn off the electrical power before inserting, removing, or cleaning the replacement Ushio EKE lamp. Affix the EKE Ushio replacement lamp securely in the socket. Improper installation of the Ushio EKE replacement lamp will cause electrical arcing, overheating and short life to lamp and socket. Replace lamp holders and sockets when necessary. Keep the temperature of the Ushio EKE lamp seal below 350C. Keep the temperature of the EKE Ushio replacement lamp wall above 250C. Keep the temperature of the Ushio EKE JCR21V-150W lamp wall below 800C. Make sure lamps of specified wattage and voltage are only used in appropriately rated fixtures. Unspecified use will lead to short lamp life, breakage and overheating of fixture. Ushio EKE replacement lamps should not be operated beyond the total rated voltage. Avoid the use of dimmers that may drive your lamp over its rated voltage. Operate the Ushio EKE JCR21V-150W replacement lamp only in the indicated burn position. Failure to do so will lead to overheating and shortened lamp life. Use an external fuse when required. Do not allow one lamp to directly expose another. This may lead to overheating and shortened lamp life.